Breville USA Support
Breville USA Support
    Category
    • Espressso
    • Ovens
    • Juicers
    • Food Processors
    • Coffee
    • Toasters
    • Waffle Makers
    • Grills
    • Bread Maker
    • Wine Product
    Breville USA Support
    Breville USA Support
    • Espressso
    • Ovens
    • Juicers
    • Food Processors
    • Coffee
    • Toasters
    • Waffle Makers
    • Grills
    • Bread Maker
    • Wine Product
      Precision Brewer™ Thermal/Glass BDC450BSS / BDC455BSS

      Know Your Brewer

      NOTE: The information below applies to both the Precision Brewer with glass and thermal carafes.

      The Precision Brewer™ Thermal – The world’s first 60 oz. drip coffee maker with the precision required to brew craft filter coffee, automatically. Experience your favorite coffee at its best regardless of its origin, age or roast with precise temperature and brewing time.

      BDC450 Parts Explosion

      A. Tank Lid B. Water Tank
      C. LCD Display D. SELECT Dial
      E. START/CANCEL Button F. AUTO START Button
      G. Brew Basket H. Showerhead
      I. Showerhead Ring J. Drip Stop Lever
      K. Carafe Lid L. Thermal Carafe

       

      BDC450 Accessories

      A. Cone Filter Insert B. Mesh Basket Filter
      C. Brew Basket D. Breville® Coffee Measuring Scoop
      E. Flat Bottom Paper Filter (10 included) F. Water Hardness Test Strip

      Special Features

      The BDC450BSS comes with some special features.

      • Multiple Brew Types – The BDC450BSS comes with several varied brew types to personalize your brew to match your exact taste. From Fast to Strong, Over Ice to MyBrew and introducing the Cold Brew setting.
      • Thermal Carafe – A full 60 oz. thermal carafe to keep as much coffee as you like as hot at you like it for extended amounts of time.
      • MyBrew Setting – A personalized setting is available to allow you to completely customize your coffee. From the brew temperature to the bloom time to flow rate, adjust to whatever your preference is to make your coffee perfection.

      Set Up

      Set up of the Precision Brewer™ Thermal is quick and easy.

      1. Ensure that the brewer is on a flat dry surface.
      2. Fill the water tank with water and place on the brewer. Turn the power on the retrieve the water hardness test strip.
      3. The first time the brewer is turned on the LCD will read ‘Hard’, asking you to set the water hardness level.
      4. Dip the water hardness test strip into the filled water tank for 1 second, remove, and wait 60 seconds to reveal the results. Rotate the SELECT dial and until the corresponding hardness setting is showing then press the SELECT dial to set.
      5. Ensure that the coffee basket and empty carafe (with the lid attached) are placed in the brewer.
      6. Rotate the SELECT dial to FAST and press the START/CANCEL button.
      7. This is just the initial flush of the system and once all water is brewed into the carafe, you will hear a quiet signal and can empty and rinse both the carafe and the basket.

      Before First Use

      Follow instructions in “Set Up” section above and additionally:

      • Remove all packaging and promotional materials carefully, ensuring that all parts are removed.
      • Wipe the exterior with a soft damp cloth.
      • Wash the lid, brew basket, cone filter insert, mesh basket filter, and carafe in warm soapy water.
      • Rinse and dry all parts thoroughly.

      Warranty

      All Breville® products have at least a one-year limited product warranty, valid from the date of purchase. Should your Breville® product have a defect in product material or workmanship within the Warranty period, Breville® will arrange to have your original product returned to us, and either deliver an identical or comparable replacement to you, free of charge, or apply such other remedy as described below. Some models may have longer warranty periods on the product or specific components so please consult the individual product warranty for complete terms and conditions.

      DO NOT RETURN PRODUCT TO THE STORE*

      Please follow these instructions, subject to the terms of the Warranty, to receive faster service:

      1. Write down the product model number, batch code (this is a 3 or 4 digit number) and/or serial number. These can be found on a sticker or molded into the product housing and are typically located underneath or on the back of the product

      2. Have the original or a copy of the sales receipt.

      3. Contact Breville®. Please see Breville® USA contact information below.

      4. If the product, or one of its parts, qualifies for replacement or service under the Warranty, Breville® will send a pre-paid shipping label via email so that the product may be sent to Breville® at no cost to you. Upon receipt of the product, Breville® may ship the replacement or contact you with further information regarding repair of the product. Typical turnaround time to address Warranty claims is up to 10 business days, plus shipping, depending on your geographical location and type of damage or Warranty claim.

      5. For additional protection of the product and and to ensure secure handling while a product is being returned for any Warranty repair, Breville® recommends that you use Breville’s shipping label or a traceable, insured delivery service. Breville® is not responsible for any damage while a product is in transit.

      For the complete terms of warranty, see the warranty PDF:
      pdf the Precision Brewer™ Thermal, BDC450BSS has a 2 year Limited Product Warranty:
      BDC450BSS 2-Year Limited Product Warranty

      * California residents – please see paragraph entitled “Warranty Notice to California Residents Only” on page 4.

      Breville® USA Contact Information

      BrevilleUSA.com
      Ask Us
      1-866-BREVILLE (1-866-273-8455)
      8am to 5pm (Pacific Time) Monday through Friday, excluding holidays
      Head Office Address:
      19400 S. Western Ave
      Torrance, CA 90501
      (Please do not return product to this address without speaking to Breville® and obtaining a Return Authority number.)

      Care and Use

      • Pre-Heating the Carafe or cup is suggested for best results and does not need to take any longer then 30 seconds. Fill the container with hot water and let sit for 30 seconds before discarding.
      • Water quality is essential for the perfect coffee. If the water container excessive sediment, or has an off odor or taste, it will alter the coffee. Also, if the water is lacking all minerals, the coffee can taste dull or stale. We recommend the use of filtered water.
      • The Precision Brewer™ Thermal will work equally as well with freshly ground coffee and pre-ground coffee. It’s always recommended that freshly roasted and ground coffee is used as this will result in the richest fullest flavored coffee.
      • The standard coffee cup size used for the following information is a 5oz cup. It is best to adjust for personal taste but the following is a suggested brewing ration of water to coffee

      BDC450BSS Coffee Water Ratio

      Care

      • Always turn off the coffee machine and remove the plug from the power outlet before cleaning.
      • Clean the outer housing and LCD screen with a soft damp cloth. When cleaning the LCD, apply cleaner to the cloth, not directly to the LCD.
      • Do not use abrasive cloths or cleaners on any part of the brewer.
      • Remove the coffee basket and discard any ground or paper filters.
      • The baskets can be rinsed with warm water and if deeper cleaning is required, a soft bristled brush with hot soapy water can be used.
      • After each use, empty the carafe; do not allow coffee to sit overnight as this could cause stains.
      • As with the baskets, rinsing with warm water will clean the carafe but if deeper cleaning is required, use a soft bristled brush and hot soapy water.
      • Periodically wipe down the shower head area with a soft damp cloth. If deeper cleaning is needed, the showerhead ring can be unscrewed counter-clockwise and the shower head can be pulled down. Use the same soft bristled brush and hot soapy water.
          <ul

        • Descale Your Brewer
        • The descale process takes approximately 15 minutes to complete.
        • 1. Empty the tank and prepare the descale solution according to the manufacuter’s instructions. Pour the solution into the tank.
        • 2. Place the basket and carafe into position. Ensure there is no coffee or paper filter in the basket. Ensure the carafe is empty with the lid on.
        • 3. Press and hold the SELECT button for 3 seconds then release. “dSL” will appear on the LCD screen for 1 second and then show a count down of the time remaining on the descale cycle.
        • 4. When the descale process is finished, the LCD screen will go back to the main menu. Rinse the water tank, and basket with fresh water. Discard the liquid in the carafe and rinse with fresh water as well.

      Brewing Tips

      • Pre-Heating the Carafe or cup is suggested for best results and does not need to take any longer then 30 seconds. Fill the container with hot water and let sit for 30 seconds before discarding.
      • Water quality is essential for the perfect coffee. If the water container excessive sediment, or has an off odor or taste, it will alter the coffee. Also, if the water is lacking all minerals, the coffee can taste dull or stale. We recommend the use of filtered water.
      • The Precision Brewer™ Thermal will work equally as well with freshly ground coffee and pre-ground coffee. It’s always recommended that freshly roasted and ground coffee is used as this will result in the richest fullest flavored coffee.
      • The standard coffee cup size used for the following information is a 5oz cup. It is best to adjust for personal taste but the following is a suggested brewing ration of water to coffee

      BDC450BSS Coffee Water Ratio

      Troubleshooting

      Auto Start Does Not Function

      The Auto Start feature on the Precision Brewer™ Thermal is not repeating. The actual Auto Start will need to be re-engaged each time it is going to be used.

      Descaling your machine

      Descale Your Brewer

      • The descale process takes approximately 15 minutes to complete.
      • 1. Empty the tank and prepare the descale solution according to the manufacturer’s instructions. Pour the solution into the tank.
      • 2. Place the basket and carafe into position. Ensure there is no coffee or paper filter in the basket. Ensure the carafe is empty with the lid on.
      • 3. Press and hold the SELECT button for 3 seconds then release. “dSL” will appear on the LCD screen for 1 second and then show a count down of the time remaining on the descale cycle.
      • 4. When the descale process is finished, the LCD screen will go back to the main menu. Rinse the water tank, and basket with fresh water. Discard the liquid in the carafe and rinse with fresh water as well.

      Descaling Instructions

      Slow Brew

      If you are experiencing a slow brew or extended brew times, your brewer may need to be descaled or your coffee may be ground a bit too fine. Please see descaling instructions here.

      Click Here To Download Instruction Booklet

      Click here for Parts and Accessories for Precision Brewer Thermal

      Click here for Parts and Accessories for Precision Brewer Glass

      Categories:
      Coffee
      Category
      • Espressso
      • Ovens
      • Juicers
      • Food Processors
      • Coffee
      • Toasters
      • Waffle Makers
      • Grills
      • Bread Maker
      • Wine Product
      All headings of this content.
      Content Index
      • Top
      • 1
        Know Your Brewer
      • 1.1
        Special Features
      • 2
        Set Up
      • 2.1
        Before First Use
      • 3
        Warranty
      • 4
        Care and Use
      • 4.1
        Care
      • 4.2
        Brewing Tips
      • 5
        Troubleshooting
      • 6
        Instruction Booklet
      • 6
        Parts and Accessories